|
A Goderich-based window and door manufacturer has
been fined $65,000 for a violation of the Occupational Health & Safety
Act (the Act). The incident took place in September, 2008 and resulted in a
worker falling and suffering wrist and head injuries.
According to the MOL, the worker was dismantling the roof of a sound
enclosure. The worker unhooked the fall protection line and moved towards a
ladder to get down. The worker stepped on an unsecured plywood plank. The plank
slipped and the worker fell four metres to the ground.
Dashwood Industries Limited pleaded guilty under the Act to failing to
ensure the plywood was 'secured in place' as required in by section 15(a) of the
Regulation for Industrial Establishments (Reg. 851).
|
Regulation for Industrial
Establishments (Reg. 851)
15. A cover on an opening
in a floor, roof or other surface shall be,
(a) secured in place;
|
Want
to know more about this or other prosecutions?
Want to read about the
current MOL workplace inspection blitz looking for hazards responsible for
slips, trips and falls?
Want to read the WHSC
Working at Heights hazard bulletin?
Want to know about
WHSC training for Fall Protection?
Want to know how WHSC training can help prepare all workplace parties to
understand and comply with Ontario health and safety law call 1-888-869-7950, or
contact a training service
representative at a WHSC near you. |